PV Firefighter Safety Switch for Photovoltaic Systems
Technical solution for safe DC string disconnection, emergency PV shutdown and firefighter safety in commercial and industrial solar installations.
What is a PV Firefighter Safety Switch?
A PV firefighter safety switch is a safety device designed to selectively disconnect photovoltaic DC circuits at string level. It is intended to protect firefighters, emergency responders and service personnel, particularly during fires or rescue operations in buildings equipped with photovoltaic systems.
Since PV modules continuously generate DC voltage whenever exposed to light, the DC cables between the PV generator and the inverter remain live even after the AC side has been disconnected.
By disconnecting the PV strings at string level, multiple modules can be safely isolated at a defined point close to the roof or building entry. As a result, no dangerous DC voltage remains on the cables between the firefighter safety switch and the inverter.
This shutdown principle has proven to be technically robust, economically efficient and highly practical, particularly for commercial and industrial photovoltaic systems.
Module-level shutdown systems are used in certain applications but usually involve increased technical effort, additional system complexity and higher costs.
Modern firefighter safety switches with string-level disconnection can be integrated into fire protection and PV planning concepts and can be triggered manually or via external control signals such as emergency stop buttons or fire alarm systems.
Galvanic isolation according to IEC 60947-3
Protection for firefighters and emergency responders
Automatic or manual emergency shutdown
Modern systems such as the QFire PV firefighter safety switch support automatic and manual emergency shutdown and are designed for safe PV generator disconnection according to IEC 60947-3.
Why PV Systems Need Emergency DC Shutdown?
Photovoltaic systems can generate DC voltages of up to 1,500 V. Even when the inverter is switched off, the DC string cables may remain live.
In emergency situations, this can:
Complicate rescue operations
Endanger firefighters and emergency responders
Delay firefighting operations
A firefighter safety switch enables galvanic disconnection of the PV strings directly at the building entry point or close to the roof entry.
The challenge of DC voltage: photovoltaic systems continuously generate voltage when exposed to light.
Disconnecting the AC side alone does not automatically make a PV system DC-safe.
How Does a PV Firefighter Safety Switch Work?
A firefighter safety switch disconnects the PV strings automatically or manually from the inverter by galvanic isolation in emergency situations. Typical system components include:
[1] Switching units installed close to the roof entry point
[2] Control unit located near the inverter
[3] Optional external emergency stop and connection to a fire alarm system
Optional components include:
■ Integration with a fire alarm system
■ Integrated surge protection
■ Integrated fuses in the positive and/or negative poles
■ Cluster control for multiple roof areas
In the event of shutdown, all PV strings are galvanically isolated so that the cables between the firefighter safety switch and the inverter become de-energised.
Flexible integration for different photovoltaic system concepts – from small commercial installations to large-scale PV systems with multiple generator fields.
Technical Requirements for Modern PV Firefighter Safety Switches
Modern firefighter safety switch systems must meet a wide range of technical requirements:
Certified according to IEC 60947-3
System voltages up to 1,500 V DC
String currents up to 20 A per string
Safe shutdown without arcing – through galvanic isolation
Robust enclosures for outdoor installation (IP66/IP67)
Integration of surge protection and/or string fuses
Basic Principle of DC-Side Shutdown
In photovoltaic systems, DC voltage is generated directly within the PV generator. This means that DC cables can remain critical even when only the AC supply has been disconnected.
QFire addresses this issue by disconnecting the PV strings at string level close to the roof entry point or near the PV modules. The goal is to safely de-energise the cables between the switching unit and the inverter in the event of emergency shutdown.
Advantages of this shutdown principle
DC-side shutdown directly within the PV system
Galvanic isolation of all PV strings
Reduction of dangerous DC voltage during fire emergencies
Shutdown close to the roof entry point or near the PV modules
The QFire PV firefighter safety switch is designed for safe DC-side shutdown of photovoltaic systems. Unlike purely AC-side shutdown concepts, the DC voltage generated by the PV system is disconnected directly at the source.
This helps prevent dangerous DC voltage from continuing to enter the building through the string cables during fire or emergency situations.
Shutdown is achieved through galvanic isolation of all active conductors (positive and negative) for each PV string. After activation, the PV strings are de-energised so that no dangerous DC voltage remains on the cables or at the inverter inputs.
Galvanic Isolation of PV Strings
In the event of emergency shutdown, the QFire PV firefighter safety switch disconnects all connected PV strings galvanically and on both poles according to IEC 60947-3. Both the positive and negative conductors of each string are reliably isolated from the inverter to maximise safety during fire and emergency situations.
Clear distinction from motor switch solutions
Two-pole disconnection of positive and negative conductors
Safe interruption of the DC connection
DC-side shutdown directly at string level instead of AC-side isolation only
Suitable for system voltages up to 1,500 V DC and string currents up to 20 A
Galvanic isolation completely interrupts the electrical connection between the PV generator and the inverter. After activation, the cables downstream of the QFire switching unit are de-energised. This principle significantly reduces DC-related hazards during fire emergencies and helps maximise safety for firefighters, emergency responders and service personnel.
This shutdown principle significantly improves safety during fire and emergency situations by reliably interrupting dangerous DC voltage. At the same time, galvanic isolation remains effective regardless of the PV system configuration, string length or the number of connected generator fields.
Reliable Triggering: Emergency Shutdown Mechanisms for PV Firefighter Safety Switches
Multiple triggering methods ensure reliable shutdown in emergency situations — manually, automatically or via external control signals.
The QFire firefighter safety switch can be triggered in several different ways. In addition to manual shutdown via the control unit or external emergency stop buttons, the system also responds automatically to defined fault conditions.
In the event of grid failure or undervoltage, the relays automatically open and galvanically disconnect the connected PV strings from the inverter. This ensures that the safety function remains active even if the supply voltage fails.
The system also detects cable breakage or voltage drops within the control circuit and automatically initiates a safe shutdown.
Manual shutdown via main switch
External emergency stop or key switch
Automatic shutdown in case of grid failure
Undervoltage detection
Cable break monitoring
Potential-free interfaces for fire alarm systems
Fail-Safe Principle
If the supply voltage fails or the control line is interrupted, the QFire PV firefighter safety switch automatically switches off and galvanically disconnects the PV strings from the inverter.
The fail-safe principle increases safety during fire emergencies and helps minimise the risk of unintentionally live DC cables.
Emergency Shutdown Options for the QFire PV Firefighter Safety Switch
QFire LITE
QFire LITE is a standardised solution for DC-side PV string disconnection in photovoltaic systems. The shutdown is performed via the Switch Box, which is installed close to the PV modules or near the roof entry point.
The system is triggered via a simple and clearly defined control interface, for example by an external emergency stop button or control signal.
QFire BIG
QFire BIG includes a central Control Box with extended functionality for controlling the connected Switch Boxes.
The Control Box provides visual status indication and supports integration of external emergency shutdown devices as well as connection to fire alarm systems (FAS) for automatic triggering.
QFire LITE shutdown can be triggered by:
AC-coupled shutdown via the grid supply in case of power failure – automatic restart when the grid returns
External emergency stop
Undervoltage caused by cable breakage or strong AC grid fluctuations
QFire BIG shutdown can be triggered by:
AC-coupled shutdown via the grid supply in case of power failure – automatic restart when the grid returns
External emergency stop
Undervoltage caused by cable breakage or strong AC grid fluctuations
Manual shutdown via the Control Box
Connection to a fire alarm control panel
Suitable external switches for PV firefighter safety switches (emergency stop, key switch, break-glass emergency stop)
QFire BIG Control Unit – Central Control of the Firefighter Safety Switch System
Monitoring of control signals
Statusanzeige
Control of individual or multiple Switch Boxes
Triggering via defined control interfaces
Potential-free interfaces for fire alarm systems (FAS/FACP)
The Control Box is the central control element of the QFire PV firefighter safety switch system. It processes incoming control signals and transmits the shutdown commands to the connected Switch Boxes in the event of activation.
Triggering is performed via a clearly defined control interface, for example through an external firefighter emergency button, a fire alarm system or an AC-coupled shutdown in case of grid failure.
The DC-side shutdown itself is performed exclusively inside the Switch Boxes. The Control Box is responsible only for safe system control and monitoring.
Cluster Control Box for Multiple Roof Areas and Generator Fields
Star-shaped connection of multiple Switch Boxes
Simultaneous shutdown of multiple roof areas
Suitable for large and complex photovoltaic systems
For larger photovoltaic systems with multiple roof areas or generator fields, the QFire Cluster Control Box is used. It enables central control of several Switch Boxes installed in different locations.
The Switch Boxes are connected to the Cluster Control Box in a star-shaped configuration. This allows multiple roof areas or generator sections to be shut down centrally and simultaneously.
Using cluster technology, complete PV system sections or multiple roof areas can be shut down simultaneously. This is particularly advantageous for commercial, industrial and large-scale solar installations with several generator sections or feed-in points. The cluster architecture also allows flexible expansion for large and complex photovoltaic system structures.
The Switching Unit – DC-Side PV String Disconnection
Two-pole galvanic isolation of the positive and negative conductors of each PV string
Designed for PV systems up to 1,500 V DC and 20 A per string
Optional integrated surge protection and/or integrated fuses in the positive and negative poles
Depending on the configuration, multiple PV strings can be integrated into a single Switch Box. Optional surge protection modules can also be included to provide additional protection against transient overvoltages.
The Switch Box performs the actual DC-side shutdown of the PV strings. Each string is galvanically isolated on both poles so that no dangerous DC voltage remains at the output of the Switch Box after activation.
Standards and Regulations for PV Firefighter Safety Switches
The requirements for shutdown devices in photovoltaic systems are based on various standards and technical regulations. Important references include:
■ DIN VDE 0105-100 – Operation of electrical installations
■ VDE-AR-E 2100-712 – Fire safety for photovoltaic systems
■ IEC 60947-3 – Switches, disconnectors and switch-disconnectors for low-voltage applications
PV firefighter safety switches must reliably provide galvanic isolation of the photovoltaic system so that no dangerous voltage remains on the cables after shutdown.
Normative Framework
Technical guidance is based, among other things, on VDE regulations such as DIN VDE 0100-712 and VDE-AR-E 2100-712, as well as recommendations issued by fire services for operations involving photovoltaic systems.
For the switching devices themselves, the requirements of IEC 60947-3 are particularly relevant, as this standard defines the safe switching and isolation functions of switch-disconnectors.
Frequently Asked Questions About PV Firefighter Safety Switches
Plug & Play Installation of the QFire PV Firefighter Safety Switch
Easy installation: no internal wiring of the control cables to terminal blocks required
Reduced installation effort: matching plug connectors supplied
Reduced risk of installation errors through clearly defined plug connections instead of individual terminal wiring
Project-specific configuration: connections adapted to the individual system layout
QFire systems are equipped with a plug-and-play connection concept designed to simplify and accelerate installation of the PV firefighter safety switch system. A key feature of this solution is the use of project-specific pre-wired connectors on both the Control Box and the Switch Boxes.
This connector-based installation concept significantly simplifies on-site assembly. Only the grid connection and grounding still require internal wiring. As a result, installation times are reduced, wiring errors are minimised and installation reliability is increased — especially in larger photovoltaic systems with multiple Switch Boxes.
.
Time-Delayed Shutdown for Large-Scale and Megawatt PV Systems
Optimised shutdown logic for large photovoltaic systems
Time-delayed shutdown of large generator fields
Adjustable delay times between 1 and 10 seconds depending on system size
For very large photovoltaic systems with high installed capacity, a time-delayed shutdown sequence can be beneficial. The QFire control system can be configured so that individual generator fields or Switch Boxes are shut down sequentially with a defined time delay.
This staged shutdown process helps reduce electrical and mechanical stress and ensures controlled shutdown behaviour in large-scale photovoltaic installations.
Application Example – QFire LITE Firefighter Safety Switch for Facade PV Systems on High-Rise Buildings
High-rise photovoltaic systems with string-level shutdown for each floor
Photovoltaic systems installed on high-rise buildings, where individual PV strings are routed separately along the facade and into the building for each floor, create special requirements for DC-side safety and shutdown concepts.
In such applications, insurers and fire services often require a clearly defined, reproducible and automatically effective shutdown solution in case of fire emergencies. The QFire LITE firefighter safety switch is particularly suitable for these types of installations.
Typical Project Requirements
■ One PV string per floor with separate building entry
■ Different string bundling configurations at the inverter
■ High requirements for personal and emergency response safety
■ Central shutdown option for the fire service
■ Compliance with applicable DC switching and fire protection requirements
Solutions for Different Types of Photovoltaic Systems
PV firefighter safety switches can be integrated into a wide range of photovoltaic system concepts, including:
■ Commercial photovoltaic systems
■ Industrial and ground-mounted solar installations
■ Rooftop photovoltaic systems with multiple inverters
Das modulare QFire System ermöglicht die sichere Abschaltung von kleinen Gewerbeanlagen bis hin zu komplexen PV-Großanlagen mit mehreren Generatorfeldern.
Who Is the QFire BIG System Designed For?
PV planners and consulting engineers
Installers and EPC companies
Operators of large-scale photovoltaic systems
The QFire system was specifically developed to meet the requirements of planners, installers and EPC companies.
Thanks to its modular architecture, clearly defined system logic and simplified installation concept, the system can be integrated into a wide variety of photovoltaic system designs in compliance with applicable standards.
The combination of technical safety, scalability and easy handling makes QFire a future-proof solution for photovoltaic systems of all sizes.
Who Is the QFire LITE System Designed For?
Installers and specialised electrical contractors
Planners of smaller photovoltaic systems
Electrical wholesalers and distribution partners
The QFire LITE system is the standardised solution for small and medium-sized photovoltaic systems. It is based on the same proven safety principle as QFire BIG, but designed as a compact, non-expandable solution.
QFire LITE is particularly suitable for straightforward photovoltaic system concepts where simple integration, a limited number of strings, clear system structures and cost-efficient implementation are key priorities.
Technical Articles and Industry News About PV Firefighter Safety Switches
The use of firefighter safety switches in photovoltaic systems is widely discussed within the solar industry — particularly regarding safety, standards and emergency response concepts.
Here you will find selected technical articles, industry news and technical background information related to PV firefighter safety switches.
When Is a Firefighter Safety Switch Required for Photovoltaic Systems?
→
Generator-Side Shutdown Using a Firefighter Safety Switch
→
Q3 QFire PV Firefighter Safety Switch Receives IEC 60947-3 Certification
→
QFire PV Firefighter Safety Switch Training: Practical Training for Planners and Installers
→Q3 YouTube Video Explains the QFire PV Firefighter Safety Switch – Safe DC-Side Shutdown in Fire Emergencies
Building insurers, authorities and fire services increasingly require automatic shutdown solutions for photovoltaic systems during fire emergencies or rescue operations. The main concern is the dangerous DC voltage that may remain present in the DC cables even after the building’s AC power supply has been disconnected.
The firefighter safety switch enables safe DC-side shutdown of the PV strings directly at the building entry point or roof entry area. The system is triggered via a defined control interface, for example by disconnecting the building power supply, using an external firefighter emergency button or through connection to a fire alarm system. During activation, the PV strings are galvanically isolated so that no dangerous DC voltage is routed into the building.
Once the power supply is restored after an emergency event, the system can automatically restart. Manual intervention at the photovoltaic system or on the roof is not required in this case. This ensures both operational safety and emergency response safety for the photovoltaic installation.
The video clearly demonstrates the operating principle of a PV firefighter safety switch in a practical application scenario.
Online Training for the QFire PV Firefighter Safety Switch
Planning and installing firefighter safety switches for photovoltaic systems requires a solid understanding of technical operating principles, applicable standards and practical implementation. The QFire training programme provides practical expertise covering DC-side PV string shutdown, system integration and typical planning and installation requirements.
The training is intended for planners, specialised electrical contractors and technical decision-makers who are responsible for specifying, installing or evaluating firefighter safety switch systems.
FAQ – PV Firefighter Safety Switches and Fire Protection for Photovoltaic Systems
In connection with firefighter safety switches for photovoltaic systems, technical, normative and legal questions frequently arise in practice. These topics particularly include DC-side shutdown concepts, the distinction between string-level and module-level shutdown, integration into fire protection concepts and the question of whether firefighter safety switches are mandatory.
As there is no universal legal requirement, the use of firefighter safety switches often depends on the specific application, the photovoltaic system design, the responsible authorities and applicable standards or recommendations. The following questions and answers are intended to provide professional guidance and address common uncertainties relating to the planning, installation and operation of photovoltaic systems.
The following FAQ section summarises the most important technical and regulatory aspects relating to firefighter safety switches for photovoltaic systems and serves as a practical guide for planning, installation and operation.
Planning & Specification
For Consulting Engineers and Planning Offices
Normative guidance, planning recommendations and specification texts for firefighter safety switches in modern photovoltaic systems.
Installation & Commissioning
For Consulting Engineers and Installers
Technical fundamentals for the professional installation and commissioning of firefighter safety switches.
Produkte & Vertrieb
For Wholesalers and Distribution Partners
Overview of product variants, technical configurations and answers to frequently asked questions about PV firefighter safety switches.
